Stainless Steel Flap Barrier Gate,Controlled Access Turnstile Entry
The barrier(flap turnstile,also called flap barrier) is controlled
by a PLC which is compatible with all
types of access systems and the mechanism is enclosed in a high
quality 304 stainless steel cabinet.
Flap barriers Finish: Brushed (default) / Snow / Paint (optional,
color customizable, Wing material:
Plexiglass (default) / Flexible flame retardant polyurethane foam
(optional, color can be customized)
|Housing dimension||bridge type bevel angle 1200*300*1000mm|
|Flap arm length||275mm|
|Max arm width||900mm|
|Housing material||stainless steel 304|
|Power supply/frequency||AC220V±10%, 50HZ,AC110±10%, 60HZ|
|Drive motor||12V direct current brush motor|
|Input interface||+5V electric level signal or >100ms impulse signal, drive
current >10mA, dry contact (COM NO)|
|Opening and closing time||0.5 minute|
|Power on and reset time||3s|
|IP protection degree||IP 32|
|Inner and outer (with shelter)|
1, With function of self-examine and alarm, it is convenient for
maintenance and use.
2, Being able to program running status by the small keyboard in the
3, Preventing pedestrians or bicycle from being nipped and from hurt,
the force of the
Pole is less than 2Kg
4, Sound or light alarm function
5, Poles are automatically locked until a opening signal is received.
6, Poles synchronization
7, Automatically reset function: It will automatically lock if the
pedestrian hasn't pass
through the channel in the pre-set time after the opening. The
passing time is adjustable.
8, Channels automatically open when power off, and automatically
close when power on.
9, Several card reading devices are attachable.
10, One direction or bi-direction control are optional.
11, It can be directly controlled and managed by remote control.